BIMSELF P 4 kg
Self – adhesive elastomeric (SBS) bituminous waterproofing membrane with polyester felt reinforcement
| Product description | Self-adhesive polymer – modified bituminous waterproofing membrane produced by elastomeric bituminous mass (SBS) | ||
| EN standard | EN 13707 EN 13969 |
||
| Surface protection | Top side: | Polyethylene foil |  |
| Bottom side: | Siliconized foil |  |
|
| Reinforcement | Polyester felt | ||
| Mass | 4,0± 0,2 kg/m2 | ||
Intended use:
It is used as a self-adhesive first layer in multi-layer waterproofing systems, especially over foam-based and temperature-sensitive thermal insulation materials. Suitable for underground and above-ground waterproofing of structures requiring higher substrate stresses resistance and flexibility of low temperatures where hot application methods (with hot bitumen or torch welding) are not feasible; Within the waterproofing system, it can be installed as a single layer or combined with other types of bitumen membranes in multiple layers
Application:
Installation is carried out by a cold application method by pressing the membrane onto the substrate. During application, the protective film is simultaneously removed. The subsequent membrane is laid starting from the self-adhesive overlap edge, with prior removal of the protective film from the overlap area.
Packaging:
Roll: 10m² (1m x 10m)