Bituminous waterproofing membranesBituminous membranes for finishing layer of waterproofing on flat non-accessible roofsSelf-adhesive bituminous tapes BIMSELF REFLEX
BIMSELF V 4,5 kg REFLEX
Self – adhesive elastomeric (SBS) bituminous waterproofing membrane with fiberglass reinforcement for finishing layer of waterproofing on non-accessible flat roofs
| Product description | Self-adhesive polymer – modified bituminous waterproofing membrane produced by elastomeric bituminous mass (SBS) | ||
| EN standard | EN 13707 | ||
| Surface protection | Top side: | Colored mineral slate |  |
| Bottom side: | Siliconized foil |  |
|
| Reinforcement | Fiberglass | ||
| Mass | 4,5 ± 0,3 kg/m2 | ||
Intended use:
It is used as a finishing, protective, and decorative (self-adhesive) layer in bitumen waterproofing systems for non-accessible flat roofs, for buildings where higher substrate stresses resistance and flexibility at low temperatures are required. In addition to its UV protection function, this membrane also serves as a waterproofing layer. Within the waterproofing system, it can be installed as a single layer or combined with other types of bitumen membranes in multiple layers.
Application:
Installation is carried out by a cold application method by pressing the membrane onto the substrate. During application, the protective silicone release film is simultaneously removed. The subsequent membrane is laid starting from the self-adhesive overlap edge, with prior removal of the protective film from the overlap area.
Packaging:
Roll: 10m² (1m x 10m)